RA-47
Robust design and analogue or digital positioning options
The RA-47 is an actuator with a robust design and a precise position control system. With a maximum load capacity of 2.500 N (562 lbf), it’s truly one of a kind given that it offers a wide range of features in an in-line motor configuration: options for analogue or digital position control, integrated limit switches and a high degree of protection against both solids and liquids.
High load lifting capacity
The RA-47 is ideal for all types of applications where it is necessary to tilt, lift, retract or push loads of up to 2,500 N.
Signal options for positioning
The RA-47 is available with an absolute or relative position control system, either using a low impedance potentiometer or a Hall sensor.
Integrated safety
The RA-47 has been designed with an integrated overload protection system that prevents any damage due to an unexpected overcurrent event. This system also controls the temperature of the motor, preventing it from overheating if it is used at an excessive work cycle.
Limit switches for greater reliability
The RA-47 has built-in limit switches to ensure that the actuator stops when it reaches the end of its stroke. 
IP65 protection level
which guarantees a tight seal and protects against water sprays from any direction. 
Analogue signal option
Potentiometer for absolute position control. 
Digital signal option
Hall Sensor for absolute position control. 
Limit switches
to ensure that the actuator stops at the end of its stroke. 7,40 in + stroke
3,9 in
562 lbf
0,13 in/s
REGNER® products are subjected to rigorous test procedures in which endurance tests are carried out to ensure reliable operation in applications and environments anywhere in the world.
We supply electric linear actuators of the highest quality that have been evaluated, approved and certified by accredited certification entities to achieve maximum safety and customer satisfaction.
How to read our codes?
Actuator Configuration Guide RA-47
* Length between centres when the actuator is retracted. This is the minimum length to consider for mounting.
** Mounting hole type: H = Standard; D = Clevis
*** Type of position control: P = Potentiometer + limit switches; E = Hall sensor + limit switches; L = Only limit switches.
Reviews
There are no reviews yet.