RA-38
Deliberately simple, essential design
The RA-38 linear actuator provides reliability and precision in a light and easy-to-integrate solution, adapting to the smallest spaces with ease.
With an elegant design, it’s the ideal choice for all types of applications where a tilt, lift, pull or push force of up to 2.000 N (450 lbf) is required.
Anodised aluminium casing
The RA-38 is encased in an ultra-strong anodised aluminium casing, allowing it to keep working even in the harshest conditions.
Integrated safety
The RA-38 has been designed with an integrated overload protection system that prevents any damage due to an unexpected overcurrent event. This system also controls the temperature of the motor, preventing it from overheating if it is used at an excessive work cycle.
Elegant and visible design that is part of the application
Due to its elegant and stylised lines, it's the preferred choice for applications where design is part of the solution, showcasing it at all times, such as in electric wheelchair devices. Due to its compact design, it is also favoured for metrology applications, given that it can easily be integrated into 3D inspection arms, as well as robotic inspection equipment. 
IP54 protection level
which guarantees protection against the entry of dust as well as water spray from any angle. 
Anodised aluminium casing
which guarantees strong protection against corrosion and high resistance to abrasion. 
Integrated safety
for protection against overloads that prevents any damage due to an unexpected overcurrent event. 6,1 in + stroke
1,5 | 1,9 | 3 | 3,2 | 4 in
112,4 lbf
0,69 in/s
225 lbf
0,4 in/s
450 lbf
0,2 in/s
REGNER® products are subjected to rigorous test procedures in which endurance tests are carried out to ensure reliable operation in applications and environments anywhere in the world.
We supply electric linear actuators of the highest quality that have been evaluated, approved and certified by accredited certification entities to achieve maximum safety and customer satisfaction.
How to read our codes?
Actuator Configuration Guide RA-38
* Length between centres when the actuator is retracted. This is the minimum length to consider for mounting.
** Mounting hole type: H = Clevis; D = Standard.
Nick G –
Actuator works fine, 100% description matches.