RA-MINI PLAST

Economical and powerful in a polyamide housing

The RA-MINI PLAST is the perfect combination of power, ultra-compact design and high performance for applications where a tilt, lift, retract or push force of up to 70 N (15,7 lbf) is required.

The true heart of this high-tech device is its powerful transmission system that provides high power and performance, ensuring reliable and precise movement.

Polyamide housing The RA-MINI PLAST is encased in a glass fibre-reinforced polyamide housing, guaranteeing high resistance and durability.
Integrated security The RA-MINI PLAST has been designed with an integrated overload protection system that prevents any damage due to an unexpected overcurrent event. This system also controls the temperature of the motor, preventing it from overheating if it is used at an excessive work cycle.
Limit switches for greater reliability The RA-MINI PLAST has built-in limit switches to ensure that the actuator stops when it reaches the end of its stroke.
Low energy consumption Compared to pneumatic systems, the energy consumption of the RA-MINI PLAST is considerably less, with a maximum of only 114 mA.
IP54 protection level which guarantees protection against the entry of dust as well as water spray from any angle.
Polyamide casing with glass fibre reinforcement that guarantees great resistance and durability.
Integrated security for protection against overloads that prevents any damage due to an unexpected overcurrent event.
Limit switches to ensure that the actuator stops at the end of its stroke.
Low energy consumption compared to pneumatic systems, given that its maximum consumption is only 114 mA.
Main specifications
Supply
12 VDC
Retracted length (between centres)
59 mm + stroke
2,3 in + stroke
Stroke
10 | 30 | 50 mm
0,4 | 1,2 | 2 in
Housing material
Polyamide
Rod material
Polished stainless steel
IP Rating
IP54
Limit switches
Built-in
High speed
Maximum load
20 N
4,5 lbf
Maximum speed
14,7 mm/s
0,58 in/s
Standard
Maximum load
45 N
10,1 lbf
Maximum speed
5,9 mm/s
0,23 in/s
High force
Maximum load
70 N
15,7 lbf
Maximum speed
4,6 mm/s
0,18 in/s

REGNER® products are subjected to rigorous test procedures in which endurance tests are carried out to ensure reliable operation in applications and environments anywhere in the world.

We supply electric linear actuators of the highest quality that have been evaluated, approved and certified by accredited certification entities to achieve maximum safety and customer satisfaction.

How to read our codes?

Actuator Configuration Guide RA-MINI PLAST

Position
1
2
3
4
5
6
7
Example
RA-MINI
45
30
87
350
D
4
Concept
Actuator type
Maximum load (N)
Stroke length (mm)
Minimum length* (mm)
Cable length (mm)
Hole type**
Hole diameter (mm)

* Length between centres when the actuator is retracted. This is the minimum length to consider for mounting.
** Mounting hole type: H = Pin; D = Blind hole.
*** Position control: P = Potentiometric position control. L = Limit switches, without position control.


Buy your actuator

RA-MINI PLAST

(1 customer review)

60,5074,50

Economical and powerful in a polyamide housing

Clear
SKU: N/A Category:

Description

The RA-MINI PLAST is the perfect combination of power, ultra-compact design and high performance for applications where a tilt, lift, retract or push force of up to 70 N (15,7 lbf) is required.

The true heart of this high-tech device is its powerful transmission system that provides high power and performance, ensuring reliable and precise movement.

Additional information

Weight 0,3 kg
Dimensions 20 × 6 × 6 cm
Force & speed

14.7 mm/s & 20 N (High speed), 4.7 mm/s & 70 N (High force), 5.9 mm/s & 45 N (Standard)

Stroke

10mm, 30mm, 50mm

Control

Limit switches, Position control (potentiometer)

1 review for RA-MINI PLAST

  1. JM

    Good

Show reviews in all languages (3)

Add a review

Your email address will not be published.

RA-MINI PLAST

(1 customer review)

60,5074,50

Economical and powerful in a polyamide housing

Clear
SKU: N/A Category:

Description

The RA-MINI PLAST is the perfect combination of power, ultra-compact design and high performance for applications where a tilt, lift, retract or push force of up to 70 N (15,7 lbf) is required.

The true heart of this high-tech device is its powerful transmission system that provides high power and performance, ensuring reliable and precise movement.

Additional information

Weight 0,3 kg
Dimensions 20 × 6 × 6 cm
Force & speed

14.7 mm/s & 20 N (High speed), 4.7 mm/s & 70 N (High force), 5.9 mm/s & 45 N (Standard)

Stroke

10mm, 30mm, 50mm

Control

Limit switches, Position control (potentiometer)

1 review for RA-MINI PLAST

  1. JM

    Good

Show reviews in all languages (3)

Add a review

Your email address will not be published.

×ATENCIÓ: Cookies no configurades en l'idioma actual. Revisa la teva configuració al plugin, gràcies!