For mobility devices
At REGNER®, we know that wheelchair users need safe, reliable, and silent motion to lead an independent, barrier-free, and comfortable lifestyle.
This is why our actuators are designed to provide smooth, regular motion to these mobility devices, in which they carry out the important task of regulating each of the drives with great precision, whether to raise the seat, position the footrest or adjust the angle of the backrest.
Power wheelchair manufacturers choose REGNER® for the quality of our actuators, which stand out for:
- Certified technology
REGNER® has specialized in developing and producing actuators for wheelchairs in strict compliance with the ISO 13485 quality standard for medical devices.
- Compact design
The size of our compact actuators contributes to more intelligent, ergonomic, and adaptive power wheelchairs.
- Quiet operation
Our actuators produce very muffled sounds (48 to 52 dB), which favors the overall comfort of the wheelchair.
CUSTOMER: WHEELCHAIR MANUFACTURER, HEIDELBERG (GERMANY)
ACTUATOR: RA47 WITH POSITION CONTROL
|Power supply||24 VDC||Max. load||2,500 N|
|Max. speed||3.5 mm/s||Stroke||25 – 150 mm|
|Protection||IP65||Position control||Analog signal (potentiometer)|
Optimal positioning for electronic footrest
A German wheelchair manufacturer requested a compact actuator with customizable position memory for the footrest of one of its power wheelchair models.
The RA47 was designed to meet their demands. Because of its lineal potentiometer, the actuator is in permanent contact with the control unit to identify and keep position information at all times, guaranteeing safe motion and optimal positioning.
CUSTOMER: WHEELCHAIR MANUFACTURER, FRESNO (CA, USA)
ACTUATOR: RA67 WITH ANALOGICAL POSITION SENSOR
|Power supply||24 VDC||Max. load||6,000 N|
|Max. speed||7.3 mm/s||Stroke||146 mm|
|Safety||Limit switches||Position control||Analog signal (potentiometer)|
Greater comfort and ergonomics for the wheelchair backrest
This wheelchair manufacturer needed an actuator for its reclining backrest model with position control.
The RA67 is a linear device specially designed for applications that require a lifting actuator (either for wheelchairs or for auto-elevating recliners). It retains a position memory and allows for smooth and advanced movement coordination.
CUSTOMER: WHEELCHAIR MANUFACTURER, BILBAO (SPAIN)
|Power supply||24 VDC||Max. load||2,000 N|
|Max. speed||3.4 mm/s||Stroke||100 mm|
Smooth and precise adjustments
This manufacturer needed an actuator for a new, light, easy to maneuver, and very versatile wheelchair model.
Our proposed solution was the RA38, for its simple and elegant lines and its maximum push force of 2,000 N. Housed in the back of the backrest, this electric actuator produces smooth and silent motion, which provides great ergonomics and comfort.